Home > All Products >

DinoCool 10w-40
DinoCool Conventional 10w-40 (Quart)


 

DinoCool is a conventional petroleum based motor oil
that delivers the best in anti-shear, high temperature
engine protection for modern carbureted, fuel injected,
turbocharged and supercharged engines.
It has additional anti-wear properties and proprietary
our TWO2COOL oil additive making it perfectly designed
to protect high performance 4-cycle engines.

It is scientifically proven to improve engine performance
and lengthen oil life by decreasing sludge and neutralizing
corrosive alkalinity. This prolongs use of valve springs, pressure
plates, clutch discs and other critical internal motor parts.
DinoCool 10w-40 gives your high performance, high-rev
engine advanced protection from heat and viscosity breakdown.
Engineered for all engine makes, foreign or domestic.

Can you afford not to add this extra protection from heat?
The cost of repairing engines due to heat is much more
than preventing it to begin with.

: $10.99

Product Code: 02010


Unit of Measure:


Qty:  
Description
 
DinoCool 10w-40 adds performance and protection to your investment!

DinoCool is a conventional petroleum based motor oil that delivers the best in anti-shear, high temperature engine protection for modern carbureted, fuel injected, turbocharged and supercharged engines.


It has additional anti-wear properties and proprietary our TWO2COOL oil additive making it perfectly designed to protect high performance 4-cycle engines.

It is scientifically proven to improve engine performance and lengthen oil life by decreasing sludge and neutralizing corrosive alkalinity. This prolongs use of valve springs, pressure plates, clutch discs and other critical internal motor parts.

DinoCool 10w-40 gives your high performance, high-rev engine advanced protection from heat and viscosity breakdown.

Engineered for all engine makes, foreign or domestic.

Can you afford not to add this extra protection from heat? The cost of repairing engines due to heat is much more than preventing it to begin with.

TWO2COOL DINOPURE TEST 03-07-2008
A simple test was performed during a test day in Florida.
Oil temps were measured by a Mychron on a USED KTM 250cc
Oil Temps after a 15 minute Ride (5 Laps) were ~360 degrees.
We changed the oil to DinoCool Motor Oil and Dropped the oil temperature
50 Degrees and we were able to maintained ~307 Degrees for the Remainder of the Test day.
It is just that simple. DinoCool oils reduce heat and create power. DinoCool oil last longer and increases engine life.
Features
    • Features Anti-Sheer, Antiwear, and Anti-Scuff Additives
    • Formulated to Lubricant and cool temperature of wet clutches
    • Controls Excessive Heat from developing
    • Lowers Oil temps up to 60 Degrees
    • Stable viscosity Formula
    • Exceeds API SG/CC Specifications
    • Exceeds JASO-MA M/C Specifications
    • Exceeds your expectation of what oils can do


    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    All Products
    OIL > 4-Stroke > Conventional Petroleum
    OIL > Gasoline > Conventional Petroleum
    OIL > Motorcycle > Conventional Petroleum
    OIL > Racing > Conventional Petroleum
    OIL > Diesel > Conventional Petroleum