|
Suspension Fluids That Cool the Forks And Shocks, Unbelievable?
NOT ANYMORE!
All of our MX Series fluids feature T2C additives that lowers temps for a better and constant
suspension dampening during the entire duration of the race.
After a whoop section like this below, how could your shocks stay cooler?
|
|
Two2cool Suspension Fluids
The MX and FR series product are recommended for forks and shocks on cars, trucks, snowmobiles, motocross and cruiser motorcycles, ATVs and other racing or recreational use vehicles with rebuildable shocks. As some settling may occur over time, it is recommended the fluid be agitated before use.
Properties:
-
Multi-part additive system, anti-foam designed to prevent foam
-
Keeps seals soft
-
Anti-wear fortified
-
Superior cold temperature properties
-
Excellent heat resistance
-
Minimizes shock fade
-
Reduced Temps with MX series due to T2C additive.
TYPICAL TECHNICAL PROPERTIES
|
MX and FR Series Suspension Fluid |
|
SAE Viscosity Grade |
ISO-15 |
ISO-32 |
|
Kinematic Viscosity @ 100°C, cSt
(ASTM D-445) |
4.4 |
7.3 |
|
Kinematic Viscosity @ 40°C, cSt
(ASTM D-445) |
15.7 |
32.1 |
|
Viscosity Index (ASTM D-2270) |
210 |
205 |
|
Flash Point °C (°F) (ASTM D-92) |
175 (347) |
202 (396) |
|
Fire Point °C (°F) (ASTM D-92) |
192 (378) |
217 (423) |
|
Pour Point °C (°F) (ASTM D-97) |
-54 (-60) |
-48 (-54) |
|
Four Ball Wear Test (ASTM D-4172: 40 KG, 75°c, 1200 rpm, 1 hr scar Diameter, mm |
0.40 |
0.40 |
|
Foam Tendency Sequence I/II/III
(ASTM D-892) |
65/0, 60/0, 65/0 |
65/0, 60/0, 65/0 |
|
Blender Test (25°C, low speed, 1 min.) |
2.5 mins to settle 7% foam |
2.5 mins to settle 7% foam |
|
|
|
